Curved Red & Near-Infrared Light Panel with Adjustable Floor Stand
-
Free worldwide shipping over ＄40
-
Free returns
-
Carbon neutral
-
Secure payments
UPGRADE YOUR AT-HOME ROUTINE
Your own red-light setup.
Now just €39.99.
Make space for a little me-time. A beautifully curved LED panel, two wavelengths and an adjustable floor stand bring your light routine home — all in one easy-to-position setup.
DESIGNED AROUND YOUR ROUTINE
Set it down. Position the panel.
01
Two wavelengths
The lamp combines visible 660nm red light with 850nm near-infrared light in the same panel.
02
Flexible positioning
The jointed arm and rear panel mount let you adjust the direction of the lamp for your chosen setup.
03
A dedicated home setup
A floor base and corded power connection make this a stationary indoor lamp for use near a suitable outlet.
TWO WAVELENGTHS. ONE PANEL.
The curve that stands out.
A gently curved face, a dark brown-black finish and a generous LED layout give this lamp its distinctive look. Each of the 120 LED beads combines one 660nm red chip with two 850nm near-infrared chips.
Enjoy the convenience of both wavelengths in one panel, with 30W listed device power and a stand that keeps your hands free.
POSITION WITH CARE
The angle you need,
without a handheld device.
The spring-balanced articulated arm supports the panel from the upright pole. Adjust the joints and panel connection with the lamp switched off, then check that each connection is secure before use.
Keep the arm pointing forward in the same direction as the long part of the base. Reposition the whole stand when needed, instead of extending the lamp sideways beyond its support.
THE FOUNDATION
A flat base for your chosen spot.
Place the rectangular base on a level, dry, firm floor. Leave space around it and route the power cable away from walkways, hinges and places where it could be pulled.
This model is intended for indoor use and is not water-resistant. Keep it away from baths, showers and wet surfaces.
THE DETAILS
Everything at a glance.
| Colour / version | Brown Black · curved single-panel lamp with floor stand |
|---|---|
| Wavelengths | 660nm visible red + 850nm near-infrared |
| LED configuration | 120 LED beads; each bead contains one red chip and two near-infrared chips |
| Listed power | 30W |
| Power connection | Corded electric; 1.8m power cable |
| Adjustment | Spring-balanced articulated arm and adjustable panel connection |
| Stand footprint | Approximately 33 × 21cm (13 × 8.3in) |
| Environment | Indoor, dry location |
SETUP
Assemble, check and position.
01
Assemble the stand
With power disconnected, connect the pole sections to the base, fit the articulated arm and secure the panel at its rear mount. Follow the supplied assembly instructions.
02
Check the connections
Check that the base is level and the arm points forward over it. Secure the joints and inspect the cable. Match the electrical rating to your local supply before connecting.
03
Follow the instructions
Use the distance, session length, frequency and eye protection specified in the instructions supplied with your unit. Switch off before adjusting or moving the lamp.
IN THE BOX
The panel. The stand.
Your new setup.
Your set includes the curved LED panel, an articulated floor stand with rectangular base, a power cable and a hook.
Choose the Brown Black finish for a clean, understated look that fits naturally into your home.
EVERYDAY CARE
Keep it dry and ready.
Switch off, disconnect from power and allow the lamp to cool before handling or cleaning. Use the cleaning method in the supplied instructions; do not immerse the device or allow water into electrical parts. Check the cable and stand connections periodically.
FREQUENTLY ASKED
Ready to make it yours?
Which wavelengths does the panel use?
It combines 660nm visible red light with 850nm near-infrared light. Each of its 120 LED beads contains one red chip and two near-infrared chips.
Can I adjust the position?
Yes. The articulated arm and rear panel mount let you adjust the lamp direction. Keep the arm facing forward over the base and secure the joints before use.
How is it powered?
The lamp uses a corded electrical connection with a 1.8m power cable. Check the rating label and socket compatibility before connecting.
Where can I place it?
Choose a dry indoor space and a level, firm floor, with enough room to position the stand and keep the cable clear of walkways.
How do I begin?
Assemble the stand and follow the supplied directions for distance, session length, frequency and recommended protective eyewear. Switch the lamp off before adjusting it.
YOUR HOME ROUTINE STARTS HERE
Make it yours for €39.99.
Save €70 against the €109.99 comparison price. Choose Brown Black and add your curved light panel and stand to your basket.
Curved design. Flexible stand. Exceptional value.
Use only as directed, with the recommended eye protection. Check the electrical rating before connecting and keep the device dry. If you have a condition or take medicine that increases sensitivity to light, seek advice from a qualified clinician before use.